Chisels

4 Tooth Chisel

7/8" wide, 3/8" Shaft.For light roughing and refining the contours of your sculpture.

5 Tooth Chisel

1" wide, 1/2" shaft. For roughing and refining the contours of your sculpture.

6 Tooth Chisel

1 1/4" wide, 1/2" shaft. For heavier roughing and contouring.

8 Tooth Chisel

1 1/2" wide, 5/8" shaft. For heavier roughing and contouring. Good for leveling larger areas.

Large Point Chisel

1/2" Shaft. For roughing out and removing large amounts of stone, quickly from large pieces.

Medium Point Chisel

3/8" shaft. The standard roughing out chisel. Useful for light roughing of small pieces and larger details.

Small Point Chisel

5/16" shaft. For light roughing of small pieces and small details. Good for tight spaces, creating voids, and opening holes through a sculpture.

V-Tool

5/16" shaft. A smoothing chisel with a V-shape tip.

Rondel Chisel

5/16" shaft. A smoothing chisel with a rounded tip. Useful for smoothing hollows and round bottom grooves.

Large Cape Chisel

1/2" wide, 3/8" shaft. A heavier bodied narrow flat chisel, good for narrow flat bottom grooves.

Cape Chisel

3/8" wide, 5/16" shaft. A heavier bodied narrow flat chisel, good for narrow flat bottom grooves.

Gouge Chisel

5/16" shaft. For smoothing the bottom of hollows and for creating shallow, round bottom grooves.

Small Flat Chisel

5/8" wide, 3/8" shaft. For smoothing marks left by tooth or point chisels and refining details. Used for flat areas and convex surfaces.

Medium Flat Chisel

7/8" wide, 3/8" shaft. For smoothing marks left by tooth or point chisels and refining details. Used for flat areas and convex surfaces.

Large Flat Chisel

1 1/8" wide, 1/2" shaft. For smoothing marks left by tooth or point chisels and refining details. Used for flat areas and convex surfaces.

Reduction Chisel

1 1/2" wide, 5/8" shaft. This heavy duty 10" long chisel is used for removing corners from blocks of stone and can be used to smooth large surfaces.

Small Frosting Tool

3/8" square shaft. Used to leave a fine rough, even texture on areas of your finished sculpture.

Medium Frosting Tool

1/2" square shaft. Used to leave a medium rough, even texture on areas of your finished sculpture.

Large Frosting Tool

3/4" square shaft. Used to leave a coarse rough, even texture on areas of your finished sculpture.

Alabaster Carving Set

Set includes: 1 small flat chisel, 1 medium flat chisel, 1- 6 tooth chisel, 1 small point chisel, 1 1/2 # hammer, 2 small riffler rasps, and a tool roll.

2 Tooth Chisel

3/8" wide, 1/4" shaft. For light roughing on small pieces and tight detail areas.

3 Tooth Chisel

1/2" wide, 1/4" shaft. For light roughing on small pieces and tight detail areas.

5 Tooth Chisel

5/8" wide, 5/16" shaft. For light roughing on small pieces and tight detail areas.

V-Tool

1/4" shaft. A small smoothing chisel with a V-shape tip.

Rondel Chisel

1/4" shaft. A small smoothing chisel with a rounded tip. Useful for smoothing hollows and round bottom grooves.

Gouge Chisel

1/4" shaft. A small chisel for smoothing the bottom of hollows and creating shallow, round bottom grooves.

Small Flat Chisel

3/8" wide, 1/4" shaft. For smoothing marks left by tooth or point chisels and refining details. Used for flat areas and convex surfaces.

Medium Flat Chisel

1/2" wide, 1/4" shaft. For smoothing marks left by tooth or point chisels and refining details. Used for flat areas and convex surfaces.

Large Flat Chisel

5/8" wide, 5/16" shaft. For smoothing marks left by tooth or point chisels and refining details. Used for flat areas and convex surfaces.

5 pc. Wood Chisel Set

This set is great for shaving stone in detail areas and corners. Handles fit palm of hand.

6 pc. Wood Chisel Set

Used for shaving stone by hand in detail areas or use light taps of your mallet.